LINE 6 / DT50 – 1×12 Combo

1 369,99$


Rupture de stock

UGS : DT50-112 Catégories : , Product ID: 37185


Classic American clean, chimey and crunchy English tones, modern high-gain distortion all great amplifiers are based on one of these four celebrated amp voicings. DT50 has them all, and the four-way Voicing switch on the front panel is your speed-dial to each one.

Behind each Voicing is the perfect recipe of dynamic analog circuitry (which includes tube configuration and negative feedback loop topology), and HD amp modeling technology (which fuels the preamp and tone stack). The choice is yours.

Switchable analog components.

Each Voicing can become a classic powerhouse or totally customized thanks to tube amp guru Reinhold Bogners uniquely flexible design. The (2) 12AX7 preamp and 50W, (2) EL34 power section offer easy reconfiguration of operating class (Class A/Class AB) and power tube mode (Pentode/Triode) for a wide range of feels and tones that can be added to each Voicing: modern or vintage, tight or dynamic.

Diver down.

State-of-the-art HD modeling technology goes deeper than modeling ever has and fully integrates into Reinhold Bogners power section. The two technologies combine and deliver a truly unique and powerful playing experience available only from DT50 amplifiers.

Low-volume mode.

HD modeling technology really comes alive in low-volume mode. Perfect for recording or quieter gigs, low-volume mode lets the HD modeling technology provide both preamp and power amp tones. You can perform with all the grit and gain you need without the volume that normally comes with it.

Celestion speakers: A history of great tone.

Celestion guitar speakers are world renowned for their exceptional definition, clarity, and feel. Whether its sporting a Celestion Vintage 30 or a G12H90 that was custom-voiced for Line 6, each DT50 boasts clean tones that sparkle and sing, creamy overdrives that respond to the intricacies of your picking, and searing high-gain tones that launch themselves from the cabinet.


• Advanced HD modeling technology

• Reinhold Bogners most flexible tube design

• (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)

• Simple and straightforward 2-channel design

• Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume

• Master volume

• High and Low inputs

• Reconfigurable analog components (Class A/Class AB; Pentode/Triode)

• Complete, one-touch analog reconfiguration (via Channel select switch)

• Low-power mode

• 1×12″ Celestion custom G12H90 speaker

• L6 LINK in/thru connection for POD HD integration

• MIDI in and out

• Serial effect loop with level control

• Footswitch jack for channel switching

• XLR direct out with cabinet simulation and ground lift switch

• 4, 8 and 16-ohm speaker outs

• DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

Informations complémentaires

Poids36,468 kg
Dimensions36,6 × 82,32 × 70,08 cm


Line 6